DELPHI将金额 转换成中文大写，与英文大写
转成中文大写
// 数字转大写金额
class function TFTFloatFunc.RMBFloatToChinese(ARMBCash: Real): string;
const
cNum: WideString = '零壹贰叁肆伍陆柒捌玖-万仟佰拾亿仟佰拾万仟佰拾元角分';
cCha: array [0 .. 1, 0 .. 11] of string =
(('零仟', '零佰', '零拾', '零零零', '零零', '零亿', '零万', '零元', '亿万', '零角', '零分', '零整'),
('零', '零', '零', '零', '零', '亿', '万', '元', '亿', '零', '整', '整'));
var
i: Integer;
sNum: WideString;
begin
Result := '';
sNum := FormatFloat('0', ARMBCash * 100);
for i := 1 to Length(sNum) do
Result := Result + cNum[Ord(sNum[i]) - 47] + cNum[26 - Length(sNum) + i];
for i := 0 to 11 do // 去掉多余的零
Result := StringReplace(Result, cCha[0, i], cCha[1, i], [rfReplaceAll]);
end;
转成 英文大写
class function TFTFloatFunc.RMBFloatToEnglish(ARMBCash: Real ; intRMB: Boolean): string;
function Left(const AStr: string; ACount: Integer): string;
begin
Result := Copy(astr,1,ACount);
end;
function Right(const AStr: string; ACount: Integer): string;
begin
Result := Copy(astr,Length(AStr)-acount+1, ACount);
end;
//将在1-19之间的数字转换成英文表示法
function DigitToEn1(strDigits: String): String;
begin
Case StrToInt(strDigits) of
1: Result := 'ONE';
2: Result := 'TWO';
3: Result := 'THREE';
4: Result := 'FOUR';
5: Result := 'FIVE';
6: Result := 'SIX';
7: Result := 'SEVEN';
8: Result := 'EIGHT';
9: Result := 'NINE';
10: Result := 'TEN';
11: Result := 'ELEVEN';
12: Result := 'TWELVE';
13: Result := 'THIRTEEN';
14: Result := 'FOURTEEN';
15: Result := 'FifTEEN';
16: Result := 'SIXTEEN';
17: Result := 'SEVENTEEN';
18: Result := 'EIGHTEEN';
19: Result := 'NINETEEN';
else
Result := '';
end;
end;
//将在1-99之间的数字转换成英文表示法
function DigitToEn2(strDigits: String): String;
var
strTemp: String;
begin
if StrToInt(strDigits) < 20 then
Result := DigitToEn1(strDigits)
else begin
Case StrToInt(Left(strDigits, 1)) of
2: strTemp := 'TWENTY';
3: strTemp := 'THIRTY';
4: strTemp := 'FORTY';
5: strTemp := 'FIFTY';
6: strTemp := 'SIXTY';
7: strTemp := 'SEVENTY';
8: strTemp := 'EIGHTY';
9: strTemp := 'NINETY';
else
strTemp := '';
end;
if Right(strDigits, 1) <> '0' then
strTemp := strTemp + '-' + DigitToEn1(Right(strDigits, 1));
Result := strTemp;
end;
end;
//将在1-999之间的数字转换成英文表示法
//如intFormat为1，则在HUNDRED 后面就有 AND，否则没有。
function DigitToEn3(strDigits: String; intFormat: Integer): String;
begin
//去掉数字串前面的0
strDigits := IntToStr(StrToInt(strDigits));
if StrToFloat(strDigits) <= 19 then
Result := DigitToEn1(strDigits)
else if (StrToFloat(strDigits) >= 20) and (StrToFloat(strDigits) <= 99) then
Result := DigitToEn2(strDigits)
else begin
Result := DigitToEn1(Left(strDigits, 1)) + ' HUNDRED AND';
if (StrToFloat(Right(strDigits, 2)) > 0) and
(StrToFloat(Right(strDigits, 2)) < 20) then
if intFormat = 1 then
Result := Result + ' '+DigitToEn1(Right(strDigits, 2)) //' AND ' +
else
Result := Result + ' ' + DigitToEn1(Right(strDigits, 2))
else if (StrToFloat(Right(strDigits, 2)) >= 20)
and (StrToFloat(Right(strDigits, 2)) <= 99) then
if intFormat = 1 then
Result := Result + ' ' + DigitToEn2(Right(strDigits, 2)) //AND
else
Result := Result + ' ' + DigitToEn2(Right(strDigits, 2));
end;
end;
var
// 整数部份 小数部份
strInteger, strDecimal: String;
strTemp: String;
strDigits :string;
begin
//只能到千亿,万亿其实是没有意义的
if (ARMBCash > 999999999999.99) or ( ARMBCash< 0.01) then
raise exception.Create('Out of range, must between 0.01 - 999999999999.99');
strDigits:= FloatToStr(ARMBCash);
//有整数部分及小数部分
if (Int(ARMBCash) > 0) and (ARMBCash - Int(ARMBCash) > 0) then
begin
strInteger := Left(strDigits, Pos('.', strDigits) - 1);
strDecimal := Right(strDigits, Length(strDigits) - Pos('.', strDigits));
end
//只有整数部分
else if Int(ARMBCash) > 0 then
strInteger := IntToStr(System.Round(ARMBCash))
//只有小数部分
else if ARMBCash - Int(ARMBCash) > 0 then
strDecimal := Right(strDigits, Length(strDigits) - Pos('.', strDigits));
//得到整数部分英文表示法
if strInteger <> '' then begin
strTemp := DigitToEn3(Right(strInteger, 3), 1);
if Length(strInteger) > 3 then begin
strTemp := DigitToEn3(Left(Right(strInteger, 6),
Length(Right(strInteger, 6)) - 3), 2) + ' THOUSAND AND ' + strTemp;
//百万以上
if Length(strInteger) > 6 then
strTemp := DigitToEn3(Left(strInteger, Length(strInteger) - 6), 2) +
' MILLION AND ' + strTemp;
//十亿以上
if Length(strInteger) > 9 then
strTemp := DigitToEn3(Left(strInteger, Length(strInteger) - 9), 2) +
' BILLION AND ' + strTemp;
end;
strInteger := strTemp;
end;
if (strDecimal <> '') and (Length(strDecimal) <= 3) then
strDecimal := DigitToEn3(strDecimal, 1);
if (strInteger <> '') and (strDecimal <> '') then
if intRMB then
Result := strInteger + ' YUANS AND ' + strDecimal + ' CENTS ONLY'
else
Result := strInteger + ' DOLLARS AND ' + strDecimal + ' CENTS ONLY'
else if strInteger <> '' then
if intRMB then
Result := strInteger + ' YUANS ONLY'
else
Result := strInteger + ' DOLLARS ONLY'
else if strDecimal <> '' then
Result := strDecimal + ' CENTS ONLY'
else
Result := 'ZERO';
end;