《DSP using MATLAB》示例Example4.15 - 跑啊跑？

《DSP using MATLAB》示例Example4.15

代码：

b = [1/3, 1/3, 1/3]; a = [1, -0.95, 0.9025];               % x(n)  y(n)   coefficient

[R, p, C] = residuez(b,a)

Mp = (abs(p))\', Ap = (angle(p))\'/pi                        % polar form

Y = [-2, -3]; X =[1, 1]; xic = filtic(b,a,Y,X);

%% ----------------------------------------------
%%   START a    determine H(z) and sketch    
%% ----------------------------------------------
figure(\'NumberTitle\', \'off\', \'Name\', \'Example4.15 H(z) its pole-zero plot\')
set(gcf,\'Color\',\'white\'); 
zplane(b,a);
title(\'pole-zero plot\'); grid on;

%% ----------------------------------------------
%%    END
%% ----------------------------------------------

bxplus = [1, -0.5]; axplus = [1, -1, 1];          % X(z) transform coeff
ayplus = conv(a, axplus)                          % Denominator of Yplus(z)
byplus = conv(b,bxplus) + conv(xic,axplus)        % Numerator of Yplus(z)

[R, p, C] = residuez(byplus, ayplus)
Mp = (abs(p))\' , Ap = (angle(p))\'/pi              % polar form

%% --------------------------------------------------------------
%%    START    b   |H|   <H
%%    1st form of freqz
%% --------------------------------------------------------------
[H,w] = freqz(b,a,500);                 % 1st form of freqz

magH  = abs(H);  angH  = angle(H);  realH  = real(H);  imagH  = imag(H);

%% ================================================
%%              START H\'s  mag ang real imag
%% ================================================
figure(\'NumberTitle\', \'off\', \'Name\', \'Example4.15 H its mag ang real imag\');
set(gcf,\'Color\',\'white\'); 
subplot(2,2,1); plot(w/pi,magH); grid on;  %axis([0,1,0,1.5]); 
title(\'Magnitude Response\');
xlabel(\'frequency in \pi units\'); ylabel(\'Magnitude  |H|\'); 
subplot(2,2,3); plot(w/pi, angH/pi); grid on; % axis([-1,1,-1,1]);
title(\'Phase Response\');
xlabel(\'frequency in \pi units\'); ylabel(\'Radians/\pi\');

subplot(\'2,2,2\'); plot(w/pi, realH); grid on;
title(\'Real Part\');
xlabel(\'frequency in \pi units\'); ylabel(\'Real\');
subplot(\'2,2,4\'); plot(w/pi, imagH); grid on;
title(\'Imaginary Part\');
xlabel(\'frequency in \pi units\'); ylabel(\'Imaginary\');
%% ==================================================
%%             END H\'s  mag ang real imag
%% ==================================================

%% ---------------------------------------------------------------
%%    END    b   |H|   <H
%% ---------------------------------------------------------------


%% --------------------------------------------------------------
%%    START    b   |H|   <H
%%    3rd form of freqz
%% --------------------------------------------------------------
w = [0:1:500]*pi/500;     H = freqz(b,a,w); 
%[H,w] = freqz(b,a,200,\'whole\');                 % 3rd form of freqz

magH  = abs(H);  angH  = angle(H);  realH  = real(H);  imagH  = imag(H);

%% ================================================
%%              START H\'s  mag ang real imag
%% ================================================
figure(\'NumberTitle\', \'off\', \'Name\', \'Example4.15  using 3rd form freqz \');
set(gcf,\'Color\',\'white\'); 
subplot(2,2,1); plot(w/pi,magH); grid on;  %axis([0,1,0,1.5]); 
title(\'Magnitude Response\');
xlabel(\'frequency in \pi units\'); ylabel(\'Magnitude  |H|\'); 
subplot(2,2,3); plot(w/pi, angH/pi); grid on; % axis([-1,1,-1,1]);
title(\'Phase Response\');
xlabel(\'frequency in \pi units\'); ylabel(\'Radians/\pi\');

subplot(\'2,2,2\'); plot(w/pi, realH); grid on;
title(\'Real Part\');
xlabel(\'frequency in \pi units\'); ylabel(\'Real\');
subplot(\'2,2,4\'); plot(w/pi, imagH); grid on;
title(\'Imaginary Part\');
xlabel(\'frequency in \pi units\'); ylabel(\'Imaginary\');
%% ==================================================
%%             END H\'s  mag ang real imag
%% ==================================================

%% ---------------------------------------------------------------
%%    END    b   |H|   <H
%% ---------------------------------------------------------------

%%  START Check
n = [0:7]; x = cos(pi*n/3); y_ori = filter(b,a,x,xic)

%% MATLAB verification
A = real(2*R(1)); B = imag(2*R(1)); C = real(2*R(3)); D = imag(2*R(4));
y_check = A*cos(pi*n/3) + B *sin(pi*n/3) + ((0.95).^n) .* (C*cos(pi*n/3) + D*sin(pi*n/3))

　　结果：

发表于 2016-12-02 06:52 跑啊跑 阅读(654) 评论(0) 编辑收藏举报