caffe配置Makefile.config----ubuntu16.04--重点是matlab的编译

2023-11-08 00:05•css•阅读 2817

来源： http://blog.csdn.net/daaikuaichuan/article/details/61414219

配置Makefile.config(参考：http://blog.csdn.net/autocyz/article/details/51783857 )

折腾到这一步，离成功就不远了，接下来就是配置之前搁置的Makefile.config，进入caffe根目录，使用vim编辑器打开Makefile.config。

在打开的Makefile.config修改如下内容(我自己的配置)：

    USE_OPENCV := 1
    USE_LEVELDB := 1
    USE_LMDB := 1
    CUSTOM_CXX := g++
    CUDA_DIR := /usr/local/cuda-7.5
    CUDA_ARCH := -gencode arch=compute_20,code=sm_20 \
        -gencode arch=compute_20,code=sm_21 \
        -gencode arch=compute_30,code=sm_30 \
        -gencode arch=compute_35,code=sm_35 \
        -gencode arch=compute_50,code=sm_50 \
        -gencode arch=compute_50,code=compute_50
    BLAS := atlas
    MATLAB_DIR := /home/eric/MATLAB2014/R2014a
    PYTHON_INCLUDE := /usr/include/python2.7 \
        /usr/lib/python2.7/dist-packages/numpy/core/include
    PYTHON_LIB := /usr/local/lib
    WITH_PYTHON_LAYER := 1
    INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include /usr/include/hdf5/serial
    LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib /usr/lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu/hdf5/serial
    BUILD_DIR := build
    DISTRIBUTE_DIR := distribute

9、make所有文件

进入caffe根目录，输入如下命令：

    sudo make clean
    sudo make all -j4
    sudo make test -j4
    sudo make runtest -j4
    sudo make pycaffe -j4
    sudo make matcaffe -j4

在命令行下输入Python，会出现Python的一些信息，然后输入import caffe，没有报错说明配置成功。在命令行下输入matlab，会打开MATLAB软件。

如果前面所有的配置过程都没有问题的话，最后一步应该是不会出错的。至此，caffe所有的配置项都完成了，接下来就可以愉快地使用这个强大的深度学习框架了。

下面的是我的实际用的：

## Refer to http://caffe.berkeleyvision.org/installation.html
# Contributions simplifying and improving our build system are welcome!


BUILD_PYTHON:=1
BUILD_MATLAB:=1
BUILD_docs:=1
BUILD_SHARELIB:=1


# cuDNN acceleration switch (uncomment to build with cuDNN).
USE_CUDNN := 1

# CPU-only switch (uncomment to build without GPU support).
# CPU_ONLY := 1

# uncomment to disable IO dependencies and corresponding data layers
USE_OPENCV := 1
USE_LEVELDB := 1
USE_LMDB := 1

# uncomment to allow MDB_NOLOCK when reading LMDB files (only if necessary)
#    You should not set this flag if you will be reading LMDBs with any
#    possibility of simultaneous read and write
# ALLOW_LMDB_NOLOCK := 1

# Uncomment if you're using OpenCV 3
# OPENCV_VERSION := 3

# To customize your choice of compiler, uncomment and set the following.
# N.B. the default for Linux is g++ and the default for OSX is clang++
CUSTOM_CXX := g++

# CUDA directory contains bin/ and lib/ directories that we need.
CUDA_DIR := /usr/local/cuda
# On Ubuntu 14.04, if cuda tools are installed via
# "sudo apt-get install nvidia-cuda-toolkit" then use this instead:
# CUDA_DIR := /usr

# CUDA architecture setting: going with all of them.
# For CUDA < 6.0, comment the *_50 through *_61 lines for compatibility.
# For CUDA < 8.0, comment the *_60 and *_61 lines for compatibility.
CUDA_ARCH := -gencode arch=compute_20,code=sm_20 \
        -gencode arch=compute_20,code=sm_21 \
        -gencode arch=compute_30,code=sm_30 \
        -gencode arch=compute_35,code=sm_35 \
        -gencode arch=compute_50,code=sm_50 \
        -gencode arch=compute_52,code=sm_52 \
        -gencode arch=compute_60,code=sm_60 \
        -gencode arch=compute_61,code=sm_61 \
        -gencode arch=compute_61,code=compute_61

# BLAS choice:
# atlas for ATLAS (default)
# mkl for MKL
# open for OpenBlas
BLAS := atlas
# Custom (MKL/ATLAS/OpenBLAS) include and lib directories.
# Leave commented to accept the defaults for your choice of BLAS
# (which should work)!
BLAS_INCLUDE := /usr/include 
BLAS_LIB := /usr/lib 

# Homebrew puts openblas in a directory that is not on the standard search path
# BLAS_INCLUDE := $(shell brew --prefix openblas)/include
# BLAS_LIB := $(shell brew --prefix openblas)/lib

# This is required only if you will compile the matlab interface.
# MATLAB directory should contain the mex binary in /bin.
MATLAB_DIR := /usr/local/MATLAB/R2016b
# MATLAB_DIR := /Applications/MATLAB_R2012b.app

# NOTE: this is required only if you will compile the python interface.
# We need to be able to find Python.h and numpy/arrayobject.h.
PYTHON_INCLUDE := /usr/include/python2.7 \
        /usr/lib/python2.7/dist-packages/numpy/core/include

#PYTHON_LIB:=/usr/lib/x86_64-linux-gnu/libpython2.7.so
# Anaconda Python distribution is quite popular. Include path:
# Verify anaconda location, sometimes it's in root.
# ANACONDA_HOME := $(HOME)/anaconda
# PYTHON_INCLUDE := $(ANACONDA_HOME)/include \
        # $(ANACONDA_HOME)/include/python2.7 \
        # $(ANACONDA_HOME)/lib/python2.7/site-packages/numpy/core/include

# Uncomment to use Python 3 (default is Python 2)
# PYTHON_LIBRARIES := boost_python3 python3.5m
# PYTHON_INCLUDE := /usr/include/python3.5m \
#                 /usr/lib/python3.5/dist-packages/numpy/core/include

# We need to be able to find libpythonX.X.so or .dylib.
PYTHON_LIB := /usr/lib /usr/local/lib /usr/lib/x86_64-linux-gnu/ 
# PYTHON_LIB := $(ANACONDA_HOME)/lib

# Homebrew installs numpy in a non standard path (keg only)
# PYTHON_INCLUDE += $(dir $(shell python -c 'import numpy.core; print(numpy.core.__file__)'))/include
# PYTHON_LIB += $(shell brew --prefix numpy)/lib

# Uncomment to support layers written in Python (will link against Python libs)
WITH_PYTHON_LAYER := 1

# Whatever else you find you need goes here.
INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include
LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib

# If Homebrew is installed at a non standard location (for example your home directory) and you use it for general dependencies
# INCLUDE_DIRS += $(shell brew --prefix)/include
# LIBRARY_DIRS += $(shell brew --prefix)/lib

# NCCL acceleration switch (uncomment to build with NCCL)
# https://github.com/NVIDIA/nccl (last tested version: v1.2.3-1+cuda8.0)
# USE_NCCL := 1

# Uncomment to use `pkg-config` to specify OpenCV library paths.
# (Usually not necessary -- OpenCV libraries are normally installed in one of the above $LIBRARY_DIRS.)
# USE_PKG_CONFIG := 1

# N.B. both build and distribute dirs are cleared on `make clean`
BUILD_DIR := build
DISTRIBUTE_DIR := distribute

# Uncomment for debugging. Does not work on OSX due to https://github.com/BVLC/caffe/issues/171
# DEBUG := 1

# The ID of the GPU that 'make runtest' will use to run unit tests.
TEST_GPUID := 0

# enable pretty build (comment to see full commands)
Q ?= @





#INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include /usr/include/hdf5/serial/
INCLUDE_DIRS := $(INCLUDE_DIRS) /usr/local/include /usr/include/hdf5/serial/
LIBRARIES += glog gflags protobuf boost_system boost_filesystem m hdf5_serial_hl hdf5_serial

LIBRARY_DIRS:=$(LIBRARIES_DIRS) /usr/lib/x86_64-linux-gnu/hdf5/serial

sea@sea-X550JK:~/caffeM/caffe$ ll  matlab/+caffe/
总用量 76
drwxrwxr-x 5 sea sea 4096 11月  9 17:26 ./
drwxrwxr-x 5 sea sea 4096 11月  9 17:26 ../
-rw-rw-r-- 1 sea sea 2930 11月  9 17:26 Blob.m
-rw-rw-r-- 1 sea sea 1207 11月  9 17:26 get_net.m
-rw-rw-r-- 1 sea sea  298 11月  9 17:26 get_solver.m
drwxrwxr-x 2 sea sea 4096 11月  9 17:26 imagenet/
-rw-rw-r-- 1 sea sea 1742 11月  9 17:26 io.m
-rw-rw-r-- 1 sea sea  841 11月  9 17:26 Layer.m
-rw-rw-r-- 1 sea sea 4912 11月  9 17:26 Net.m
drwxrwxr-x 2 sea sea 4096 11月 10 19:48 private/
-rw-rw-r-- 1 sea sea  172 11月  9 17:26 reset_all.m
-rw-rw-r-- 1 sea sea  393 11月  9 17:26 run_tests.m
-rw-rw-r-- 1 sea sea  250 11月  9 17:26 set_device.m
-rw-rw-r-- 1 sea sea   97 11月  9 17:26 set_mode_cpu.m
-rw-rw-r-- 1 sea sea   97 11月  9 17:26 set_mode_gpu.m
-rw-rw-r-- 1 sea sea 1872 11月  9 17:26 Solver.m
drwxrwxr-x 2 sea sea 4096 11月  9 17:26 +test/
-rw-rw-r-- 1 sea sea  110 11月  9 17:26 version.m
sea@sea-X550JK:~/caffeM/caffe$

# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).

if [ "$PS1" ]; then
  if [ "$BASH" ] && [ "$BASH" != "/bin/sh" ]; then
    # The file bash.bashrc already sets the default PS1.
    # PS1='\h:\w\$ '
    if [ -f /etc/bash.bashrc ]; then
      . /etc/bash.bashrc
    fi
  else
    if [ "`id -u`" -eq 0 ]; then
      PS1='# '
    else
      PS1='$ '
    fi
  fi
fi

if [ -d /etc/profile.d ]; then
  for i in /etc/profile.d/*.sh; do
    if [ -r $i ]; then
      . $i
    fi
  done
  unset i
fi

export PYTHONPATH=/usr/local:$PYTHONPATH
export PYTHONPATH=$PYTHONPATH:/home/sea/caffe2/build

export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH

export PYTHONPATH=/home/sea/caffeM/caffe/python:$PYTHONPATH

export PATH=$PATH:/home/sea/caffeM/caffe/build/tools/:/usr/local/cuda-8.0/bin
export LD_LIBRARY_PATH=/usr/local/cuda-8.0/lib:$LD_LIBRARY_PATH

export PYTHONPATH=$PYTHONPATH:/home/sea/caffeM/caffe/python

export PATH=$PATH:/usr/local/MATLAB/R2016b/bin

export MATLABDIR=/usr/local/MATLAB/R2016b
export Matlab_mex=/usr/local/MATLAB/R2016b/bin/mex
export Matlab_mexext=/usr/local/MATLAB/R2016b/bin/mexext

caffe配置Makefile.config----ubuntu16.04--重点是matlab的编译

相关推荐

Ubuntu16.04+Cuda8.0+1080ti+caffe+免OpenCV3.2.0+faster-rCNN教程

ubuntu16.04, Matlab2016b caffe编译安装 转载自： https://www.cnblogs.com/haoliuhust/p/7738920.html

Ubuntu16.04 Caffe 安装步骤记录，超详尽(转载

糟心的caffe+ matlab编译路程

ubuntu16.04下安装配置深度学习环境，Ubuntu 16.04/16.10+ cuda7.5/8+cudnn4/5+caffe

Ubuntu16.04 14.04 配置caffe，CPU only

安装python caffe过程中遇到的一些问题以及对应的解决方案

Ubuntu 16.04 not a com32r image

ubuntu16.04, Matlab2016b caffe编译安装转载自： https://www.cnblogs.com/haoliuhust/p/7738920.html