apache安装及配置记录 - tiantom

2024-03-15 05:07•linux•阅读 3563

apache安装及配置记录

Last login: Thu Mar 14 22:33:53 2019 from 10.0.0.3

[root@vmhzpnginx home]# rpm -qa| grep httpd

[root@vmhzpnginx home]# yum install -y httpd

Loaded plugins: fastestmirror

Loading mirror speeds from cached hostfile

epel/x86_64/metalink | 8.6 kB 00:00:00

* base: mirrors.163.com

* epel: fedora.cs.nctu.edu.tw

* extras: mirrors.163.com

* updates: ap.stykers.moe

base | 3.6 kB 00:00:00

epel | 4.7 kB 00:00:00

extras | 3.4 kB 00:00:00

google-chrome | 1.3 kB 00:00:00

updates | 3.4 kB 00:00:00

(1/3): epel/x86_64/updateinfo | 1.0 MB 00:00:00

(2/3): google-chrome/primary | 1.7 kB 00:00:00

(3/3): epel/x86_64/primary_db | 6.6 MB 00:00:01

google-chrome 3/3

Resolving Dependencies

--> Running transaction check

---> Package httpd.x86_64 0:2.4.6-88.el7.centos will be installed

--> Processing Dependency: httpd-tools = 2.4.6-88.el7.centos for package: httpd-2.4.6-88.el7.centos.x86_64

--> Processing Dependency: libaprutil-1.so.0()(64bit) for package: httpd-2.4.6-88.el7.centos.x86_64

--> Processing Dependency: libapr-1.so.0()(64bit) for package: httpd-2.4.6-88.el7.centos.x86_64

--> Running transaction check

---> Package apr.x86_64 0:1.4.8-3.el7_4.1 will be installed

---> Package apr-util.x86_64 0:1.5.2-6.el7 will be installed

---> Package httpd-tools.x86_64 0:2.4.6-88.el7.centos will be installed

--> Finished Dependency Resolution

Dependencies Resolved

=======================================================================================

Package Arch Version Repository Size

=======================================================================================

Installing:

httpd x86_64 2.4.6-88.el7.centos base 2.7 M

Installing for dependencies:

apr x86_64 1.4.8-3.el7_4.1 base 103 k

apr-util x86_64 1.5.2-6.el7 base 92 k

httpd-tools x86_64 2.4.6-88.el7.centos base 90 k

Transaction Summary

=======================================================================================

Install 1 Package (+3 Dependent packages)

Total download size: 3.0 M

Installed size: 9.9 M

Downloading packages:

(1/4): httpd-tools-2.4.6-88.el7.centos.x86_64.rpm | 90 kB 00:00:00

(2/4): apr-1.4.8-3.el7_4.1.x86_64.rpm | 103 kB 00:00:00

(3/4): apr-util-1.5.2-6.el7.x86_64.rpm | 92 kB 00:00:00

(4/4): httpd-2.4.6-88.el7.centos.x86_64.rpm | 2.7 MB 00:00:01

---------------------------------------------------------------------------------------

Total 2.6 MB/s | 3.0 MB 00:01

Running transaction check

Running transaction test

Transaction test succeeded

Running transaction

Installing : apr-1.4.8-3.el7_4.1.x86_64 1/4

Installing : apr-util-1.5.2-6.el7.x86_64 2/4

Installing : httpd-tools-2.4.6-88.el7.centos.x86_64 3/4

Installing : httpd-2.4.6-88.el7.centos.x86_64 4/4

Verifying : httpd-tools-2.4.6-88.el7.centos.x86_64 1/4

Verifying : apr-util-1.5.2-6.el7.x86_64 2/4

Verifying : httpd-2.4.6-88.el7.centos.x86_64 3/4

Verifying : apr-1.4.8-3.el7_4.1.x86_64 4/4

Installed:

httpd.x86_64 0:2.4.6-88.el7.centos

Dependency Installed:

apr.x86_64 0:1.4.8-3.el7_4.1 apr-util.x86_64 0:1.5.2-6.el7

httpd-tools.x86_64 0:2.4.6-88.el7.centos

Complete!

[root@vmhzpnginx home]# rpm -qa| grep http

httpd-tools-2.4.6-88.el7.centos.x86_64

httpd-2.4.6-88.el7.centos.x86_64

[root@vmhzpnginx home]# rpm -qa| grep httpd

httpd-tools-2.4.6-88.el7.centos.x86_64

httpd-2.4.6-88.el7.centos.x86_64

[root@vmhzpnginx home]# find / -name "httpd.conf"

/etc/httpd/conf/httpd.conf

/usr/lib/tmpfiles.d/httpd.conf

[root@vmhzpnginx home]# cd /etc/httpd/conf

[root@vmhzpnginx conf]# ls

httpd.conf magic

[root@vmhzpnginx conf]# cat httpd.conf

# This is the main Apache HTTP server configuration file. It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>

# for a discussion of each configuration directive.

# Do NOT simply read the instructions in here without understanding

# what they do. They\'re here only as hints or reminders. If you are unsure

# consult the online docs. You have been warned.

# Configuration and logfile names: If the filenames you specify for many

# of the server\'s control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path. If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so \'log/access_log\'

# with ServerRoot set to \'/www\' will be interpreted by the

# server as \'/www/log/access_log\', where as \'/log/access_log\' will be

# interpreted as \'/log/access_log\'.

# ServerRoot: The top of the directory tree under which the server\'s

# configuration, error, and log files are kept.

# Do not add a slash at the end of the directory path. If you point

# ServerRoot at a non-local disk, be sure to specify a local disk on the

# Mutex directive, if file-based mutexes are used. If you wish to share the

# same ServerRoot for multiple httpd daemons, you will need to change at

# least PidFile.

ServerRoot "/etc/httpd"

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses.

#Listen 12.34.56.78:80

Listen 80

# Dynamic Shared Object (DSO) Support

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule\' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l\') do not need

# to be loaded here.

# Example:

# LoadModule foo_module modules/mod_foo.so

Include conf.modules.d/*.conf

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

User apache

Group apache

# \'Main\' server configuration

# The directives in this section set up the values used by the \'main\'

# server, which responds to any requests that aren\'t handled by a

# <VirtualHost> definition. These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

# ServerAdmin: Your address, where problems with the server should be

# e-mailed. This address appears on some server-generated pages, such

# as error documents. e.g. admin@your-domain.com

ServerAdmin root@localhost

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

# If your host doesn\'t have a registered DNS name, enter its IP address here.

#ServerName www.example.com:80

# Deny access to the entirety of your server\'s filesystem. You must

# explicitly permit access to web content directories in other

# <Directory> blocks below.

AllowOverride none

Require all denied

</Directory>

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something\'s not working as

# you might expect, make sure that you have specifically enabled it

# below.

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

DocumentRoot "/var/www/html"

# Relax access to content within /var/www.

AllowOverride None

# Allow open access:

Require all granted

</Directory>

# Further relax access to the default document root:

# Possible values for the Options directive are "None", "All",

# or any combination of:

# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

# Note that "MultiViews" must be named *explicitly* --- "Options All"

# doesn\'t give it to you.

# The Options directive is both complicated and important. Please see

# http://httpd.apache.org/docs/2.4/mod/core.html#options

# for more information.

Options Indexes FollowSymLinks

# AllowOverride controls what directives may be placed in .htaccess files.

# It can be "All", "None", or any combination of the keywords:

# Options FileInfo AuthConfig Limit

AllowOverride None

# Controls who can get stuff from this server.

Require all granted

</Directory>

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

DirectoryIndex index.html

</IfModule>

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

Require all denied

</Files>

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here. If you *do* define an error logfile for a <VirtualHost>

# container, that host\'s errors will be logged there and not here.

ErrorLog "logs/error_log"

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

LogLevel warn

# The following directives define some format nicknames for use with

# a CustomLog directive (see below).

LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

LogFormat "%h %l %u %t \"%r\" %>s %b" common

# You need to enable mod_logio.c to use %I and %O

LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

</IfModule>

# The location and format of the access logfile (Common Logfile Format).

# If you do not define any access logfiles within a <VirtualHost>

# container, they will be logged here. Contrariwise, if you *do*

# define per-<VirtualHost> access logfiles, transactions will be

# logged therein and *not* in this file.

#CustomLog "logs/access_log" common

# If you prefer a logfile with access, agent, and referer information

# (Combined Logfile Format) you can use the following directive.

CustomLog "logs/access_log" combined

</IfModule>

# Redirect: Allows you to tell clients about documents that used to

# exist in your server\'s namespace, but do not anymore. The client

# will make a new request for the document at its new location.

# Example:

# Redirect permanent /foo http://www.example.com/bar

# Alias: Maps web paths into filesystem paths and is used to

# access content that does not live under the DocumentRoot.

# Example:

# Alias /webpath /full/filesystem/path

# If you include a trailing / on /webpath then the server will

# require it to be present in the URL. You will also likely

# need to provide a <Directory> section to allow access to

# the filesystem path.

# ScriptAlias: This controls which directories contain server scripts.

# ScriptAliases are essentially the same as Aliases, except that

# documents in the target directory are treated as applications and

# run by the server when requested rather than as documents sent to the

# client. The same rules about trailing "/" apply to ScriptAlias

# directives as to Alias.

ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

</IfModule>

# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

AllowOverride None

Options None

Require all granted

</Directory>

# TypesConfig points to the file containing the list of mappings from

# filename extension to MIME-type.

TypesConfig /etc/mime.types

# AddType allows you to add to or override the MIME configuration

# file specified in TypesConfig for specific file types.

#AddType application/x-gzip .tgz

# AddEncoding allows you to have certain browsers uncompress

# information on the fly. Note: Not all browsers support this.

#AddEncoding x-compress .Z

#AddEncoding x-gzip .gz .tgz

# If the AddEncoding directives above are commented-out, then you

# probably should define those extensions to indicate media types:

AddType application/x-compress .Z

AddType application/x-gzip .gz .tgz

# AddHandler allows you to map certain file extensions to "handlers":

# actions unrelated to filetype. These can be either built into the server

# or added with the Action directive (see below)

# To use CGI scripts outside of ScriptAliased directories:

# (You will also need to add "ExecCGI" to the "Options" directive.)

#AddHandler cgi-script .cgi

# For type maps (negotiated resources):

#AddHandler type-map var

# Filters allow you to process content before it is sent to the client.

# To parse .shtml files for server-side includes (SSI):

# (You will also need to add "Includes" to the "Options" directive.)

AddType text/html .shtml

AddOutputFilter INCLUDES .shtml

</IfModule>

# Specify a default charset for all content served; this enables

# interpretation of all content as UTF-8 by default. To use the

# default browser choice (ISO-8859-1), or to allow the META tags

# in HTML content to override this choice, comment out this

# directive:

AddDefaultCharset UTF-8

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type. The MIMEMagicFile

# directive tells the module where the hint definitions are located.

MIMEMagicFile conf/magic

</IfModule>

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

# Some examples:

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://www.example.com/subscription_info.html

# EnableMMAP and EnableSendfile: On systems that support it,

# memory-mapping or the sendfile syscall may be used to deliver

# files. This usually improves server performance, but must

# be turned off when serving from networked-mounted

# filesystems or if support for these functions is otherwise

# broken on your system.

# Defaults if commented: EnableMMAP On, EnableSendfile Off

#EnableMMAP off

EnableSendfile on

# Supplemental configuration

# Load config files in the "/etc/httpd/conf.d" directory, if any.

IncludeOptional conf.d/*.conf

[root@vmhzpnginx conf]# ls

httpd.conf magic

[root@vmhzpnginx conf]# cp /etc/httpd/conf/httpd.conf /etc/httpd/conf/httpd.conf.bak

[root@vmhzpnginx conf]# ls

httpd.conf httpd.conf.bak magic

[root@vmhzpnginx conf]# vim httpd.conf

# This is the main Apache HTTP server configuration file. It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>

# for a discussion of each configuration directive.

# Do NOT simply read the instructions in here without understanding

# what they do. They\'re here only as hints or reminders. If you are unsure

# consult the online docs. You have been warned.

# Configuration and logfile names: If the filenames you specify for many

# of the server\'s control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path. If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so \'log/access_log\'

# with ServerRoot set to \'/www\' will be interpreted by the

# server as \'/www/log/access_log\', where as \'/log/access_log\' will be

# interpreted as \'/log/access_log\'.

# ServerRoot: The top of the directory tree under which the server\'s

# configuration, error, and log files are kept.

# Do not add a slash at the end of the directory path. If you point

# ServerRoot at a non-local disk, be sure to specify a local disk on the

# Mutex directive, if file-based mutexes are used. If you wish to share the

# same ServerRoot for multiple httpd daemons, you will need to change at

# least PidFile.

ServerRoot "/etc/httpd"

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses.

#Listen 12.34.56.78:80

Listen 80

# Dynamic Shared Object (DSO) Support

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule\' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l\') do not need

# to be loaded here.

# Example:

# LoadModule foo_module modules/mod_foo.so

Include conf.modules.d/*.conf

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

User apache

Group apache

# \'Main\' server configuration

# The directives in this section set up the values used by the \'main\'

# server, which responds to any requests that aren\'t handled by a

# <VirtualHost> definition. These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

# ServerAdmin: Your address, where problems with the server should be

# e-mailed. This address appears on some server-generated pages, such

# as error documents. e.g. admin@your-domain.com

ServerAdmin root@localhost

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

# If your host doesn\'t have a registered DNS name, enter its IP address here.

#ServerName www.example.com:80

# Deny access to the entirety of your server\'s filesystem. You must

# explicitly permit access to web content directories in other

# <Directory> blocks below.

AllowOverride none

Require all denied

</Directory>

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something\'s not working as

# you might expect, make sure that you have specifically enabled it

# below.

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

DocumentRoot "/var/www/html"

# Relax access to content within /var/www.

AllowOverride None

# Allow open access:

Require all granted

</Directory>

# Further relax access to the default document root:

# Possible values for the Options directive are "None", "All",

# or any combination of:

# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

# Note that "MultiViews" must be named *explicitly* --- "Options All"

# doesn\'t give it to you.

# The Options directive is both complicated and important. Please see

# http://httpd.apache.org/docs/2.4/mod/core.html#options

# for more information.

Options Indexes FollowSymLinks

# AllowOverride controls what directives may be placed in .htaccess files.

# It can be "All", "None", or any combination of the keywords:

# Options FileInfo AuthConfig Limit

AllowOverride None

# Controls who can get stuff from this server.

Require all granted

</Directory>

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

DirectoryIndex index.html

</IfModule>

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

Require all denied

</Files>

"httpd.conf" 353L, 11754C written

[root@vmhzpnginx conf]# cat httpd.conf

# This is the main Apache HTTP server configuration file. It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>

# for a discussion of each configuration directive.

# Do NOT simply read the instructions in here without understanding

# what they do. They\'re here only as hints or reminders. If you are unsure

# consult the online docs. You have been warned.

# Configuration and logfile names: If the filenames you specify for many

# of the server\'s control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path. If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so \'log/access_log\'

# with ServerRoot set to \'/www\' will be interpreted by the

# server as \'/www/log/access_log\', where as \'/log/access_log\' will be

# interpreted as \'/log/access_log\'.

# ServerRoot: The top of the directory tree under which the server\'s

# configuration, error, and log files are kept.

# Do not add a slash at the end of the directory path. If you point

# ServerRoot at a non-local disk, be sure to specify a local disk on the

# Mutex directive, if file-based mutexes are used. If you wish to share the

# same ServerRoot for multiple httpd daemons, you will need to change at

# least PidFile.

ServerRoot "/etc/httpd"

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses.

#Listen 12.34.56.78:80

Listen 8080

# Dynamic Shared Object (DSO) Support

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule\' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l\') do not need

# to be loaded here.

# Example:

# LoadModule foo_module modules/mod_foo.so

Include conf.modules.d/*.conf

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

User apache

Group apache

# \'Main\' server configuration

# The directives in this section set up the values used by the \'main\'

# server, which responds to any requests that aren\'t handled by a

# <VirtualHost> definition. These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

# ServerAdmin: Your address, where problems with the server should be

# e-mailed. This address appears on some server-generated pages, such

# as error documents. e.g. admin@your-domain.com

ServerAdmin root@localhost.com

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

# If your host doesn\'t have a registered DNS name, enter its IP address here.

#ServerName vmhzpnginx.com:8080

# Deny access to the entirety of your server\'s filesystem. You must

# explicitly permit access to web content directories in other

# <Directory> blocks below.

AllowOverride all

Require all denied

</Directory>

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something\'s not working as

# you might expect, make sure that you have specifically enabled it

# below.

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

DocumentRoot "/var/www/html"

# Relax access to content within /var/www.

AllowOverride None

# Allow open access:

Require all granted

</Directory>

# Further relax access to the default document root:

# Possible values for the Options directive are "None", "All",

# or any combination of:

# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

# Note that "MultiViews" must be named *explicitly* --- "Options All"

# doesn\'t give it to you.

# The Options directive is both complicated and important. Please see

# http://httpd.apache.org/docs/2.4/mod/core.html#options

# for more information.

Options Indexes FollowSymLinks

# AllowOverride controls what directives may be placed in .htaccess files.

# It can be "All", "None", or any combination of the keywords:

# Options FileInfo AuthConfig Limit

AllowOverride None

# Controls who can get stuff from this server.

Require all granted

</Directory>

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

DirectoryIndex index.html

</IfModule>

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

Require all denied

</Files>

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here. If you *do* define an error logfile for a <VirtualHost>

# container, that host\'s errors will be logged there and not here.

ErrorLog "logs/error_log"

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

LogLevel warn

# The following directives define some format nicknames for use with

# a CustomLog directive (see below).

LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

LogFormat "%h %l %u %t \"%r\" %>s %b" common

# You need to enable mod_logio.c to use %I and %O

LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

</IfModule>

# The location and format of the access logfile (Common Logfile Format).

# If you do not define any access logfiles within a <VirtualHost>

# container, they will be logged here. Contrariwise, if you *do*

# define per-<VirtualHost> access logfiles, transactions will be

# logged therein and *not* in this file.

#CustomLog "logs/access_log" common

# If you prefer a logfile with access, agent, and referer information

# (Combined Logfile Format) you can use the following directive.

CustomLog "logs/access_log" combined

</IfModule>

# Redirect: Allows you to tell clients about documents that used to

# exist in your server\'s namespace, but do not anymore. The client

# will make a new request for the document at its new location.

# Example:

# Redirect permanent /foo http://www.example.com/bar

# Alias: Maps web paths into filesystem paths and is used to

# access content that does not live under the DocumentRoot.

# Example:

# Alias /webpath /full/filesystem/path

# If you include a trailing / on /webpath then the server will

# require it to be present in the URL. You will also likely

# need to provide a <Directory> section to allow access to

# the filesystem path.

# ScriptAlias: This controls which directories contain server scripts.

# ScriptAliases are essentially the same as Aliases, except that

# documents in the target directory are treated as applications and

# run by the server when requested rather than as documents sent to the

# client. The same rules about trailing "/" apply to ScriptAlias

# directives as to Alias.

ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

</IfModule>

# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

AllowOverride None

Options None

Require all granted

</Directory>

# TypesConfig points to the file containing the list of mappings from

# filename extension to MIME-type.

TypesConfig /etc/mime.types

# AddType allows you to add to or override the MIME configuration

# file specified in TypesConfig for specific file types.

#AddType application/x-gzip .tgz

# AddEncoding allows you to have certain browsers uncompress

# information on the fly. Note: Not all browsers support this.

#AddEncoding x-compress .Z

#AddEncoding x-gzip .gz .tgz

# If the AddEncoding directives above are commented-out, then you

# probably should define those extensions to indicate media types:

AddType application/x-compress .Z

AddType application/x-gzip .gz .tgz

# AddHandler allows you to map certain file extensions to "handlers":

# actions unrelated to filetype. These can be either built into the server

# or added with the Action directive (see below)

# To use CGI scripts outside of ScriptAliased directories:

# (You will also need to add "ExecCGI" to the "Options" directive.)

#AddHandler cgi-script .cgi

# For type maps (negotiated resources):

#AddHandler type-map var

# Filters allow you to process content before it is sent to the client.

# To parse .shtml files for server-side includes (SSI):

# (You will also need to add "Includes" to the "Options" directive.)

AddType text/html .shtml

AddOutputFilter INCLUDES .shtml

</IfModule>

# Specify a default charset for all content served; this enables

# interpretation of all content as UTF-8 by default. To use the

# default browser choice (ISO-8859-1), or to allow the META tags

# in HTML content to override this choice, comment out this

# directive:

AddDefaultCharset UTF-8

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type. The MIMEMagicFile

# directive tells the module where the hint definitions are located.

MIMEMagicFile conf/magic

</IfModule>

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

# Some examples:

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://www.example.com/subscription_info.html

# EnableMMAP and EnableSendfile: On systems that support it,

# memory-mapping or the sendfile syscall may be used to deliver

# files. This usually improves server performance, but must

# be turned off when serving from networked-mounted

# filesystems or if support for these functions is otherwise

# broken on your system.

# Defaults if commented: EnableMMAP On, EnableSendfile Off

#EnableMMAP off

EnableSendfile on

# Supplemental configuration

# Load config files in the "/etc/httpd/conf.d" directory, if any.

IncludeOptional conf.d/*.conf

[root@vmhzpnginx conf]# systemctl restart httpd

[root@vmhzpnginx conf]# systemctl status httpd

● httpd.service - The Apache HTTP Server

Loaded: loaded (/usr/lib/systemd/system/httpd.service; disabled; vendor preset: disabled)

Active: active (running) since Fri 2019-03-15 07:59:21 CST; 7s ago

Docs: man:httpd(8)

man:apachectl(8)

Main PID: 22949 (httpd)

Status: "Processing requests..."

CGroup: /system.slice/httpd.service

├─22949 /usr/sbin/httpd -DFOREGROUND

├─22950 /usr/sbin/httpd -DFOREGROUND

├─22951 /usr/sbin/httpd -DFOREGROUND

├─22952 /usr/sbin/httpd -DFOREGROUND

├─22953 /usr/sbin/httpd -DFOREGROUND

└─22954 /usr/sbin/httpd -DFOREGROUND

Mar 15 07:59:21 vmhzpnginx systemd[1]: Starting The Apache HTTP Server...

Mar 15 07:59:21 vmhzpnginx httpd[22949]: AH00558: httpd: Could not reliably determ...ge

Mar 15 07:59:21 vmhzpnginx systemd[1]: Started The Apache HTTP Server.

Hint: Some lines were ellipsized, use -l to show in full.

上一篇 »PHP中级篇 Apache配置httpd-vhosts虚拟主机总结及注意事项[OK]
下一篇 »Windows下PHP使用Apache的mod_fcgid模块安装及配置

apache安装及配置记录 - tiantom

apache安装及配置记录

相关推荐

mac 安装 php7 及扩展

Linux源码包制作RPM包之Apache

apache配置php

PHP服务器配置，使用Apache及IIS两种方法

在Ubuntu 16.04安装 Let’s Encrypt并配置ssl

debian下 Hadoop 1.0.4 集群配置及运行WordCount

nginx反向代理配置及优化

centos下利用yum安装LAMP，Linux+Apache+MySQL+PHP及配置