网络之间开启RIP协议!
[R1]rip
[R1-rip-1]ver 2
[R1-rip-1]undo summary
[R1-rip-1]net 192.168.1.0
[R1-rip-1]net 1.0.0.0
[R1-rip-1]q
[R2]rip
[R2-rip-1]ver 2
[R2-rip-1]undo summary
[R2-rip-1]net 192.168.1.0
[R2-rip-1]net 192.168.2.0
[R2-rip-1]q
[R3]rip
[R3-rip-1]ver 2
[R3-rip-1]net 192.168.2.0
[R3-rip-1]net 3.0.0.0
[R3-rip-1]q
配置好动态路由后,测试能R1ping通3.3.3.3
配置ACL访问控制列表
|
| [R2]firewall enable [R2]firewall default permit [R2]acl number ? INTEGER<2000-2999> Specify a basic acl INTEGER<3000-3999> Specify an advanced acl INTEGER<4000-4999> Specify an ethernet frame header acl INTEGER<5000-5999> Specify an acl about user-defined frame or packet head [R2]acl number 2000 [R2-acl-basic-2000]rule ? INTEGER<0-65534> ID of acl rule deny Specify matched packet deny permit Specify matched packet permit [R2-acl-basic-2000]rule deny source 1.1.1.1 ? 0 Wildcard bits : 0.0.0.0 ( a host ) X.X.X.X Wildcard of source [R2-acl-basic-2000]rule deny source 1.1.1.1 0 [R2]int s0/2/0 [R2-Serial0/2/0]firewall packet-filter 2000 ? inbound Apply the acl to filter in-bound packets outbound Apply the acl to filter out-bound packets [R2-Serial0/2/0]firewall packet-filter 2000 inbound |
|
显示配置的访问控制列表的规则 [R2]display acl all Basic ACL 2000, named -none-, 1 rule, ACL's step is 5 rule 0 deny source 1.1.1.1 0 (5 times matched) [R2]display firewall-statistics all Firewall is enable, default filtering method is 'permit'. Interface: Serial0/2/0 In-bound Policy: acl 2000 Fragments matched normally From 2010-12-17 11:07:09 to 2010-12-17 11:16:29 0 packets, 0 bytes, 0% permitted, 5 packets, 420 bytes, 20% denied, 20 packets, 1072 bytes, 80% permitted default, 0 packets, 0 bytes, 0% denied default, Totally 20 packets, 1072 bytes, 80% permitted, Totally 5 packets, 420 bytes, 20% denied. |
|
ACL查看命令
配置完事ping不通的
[R1]ping -a 1.1.1.1 3.3.3.3
PING 3.3.3.3: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 3.3.3.3 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
在1上配置出站ACL,把方法一在R2上的配置去掉!
[R1]firewall enable
[R1-acl-basic-2000]rule 20 deny source 1.1.1.1 0
[R1-Serial0/2/0]firewall packet-filter 2000 outbound
[R1]int s0/2/0
[R1]ping -a 1.1.1.1 3.3.3.3
PING 3.3.3.3: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 3.3.3.3 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
注意:标准的acl在应用的时候